Flexible
Clamp System

EVS with EBS

  • For medium and larger presses (large panel progressive presses and transfer presses)
  • For clamping dies with different sizes and clamping dimensions
  • For clamping upper dies
  • For dies with straight clamping edge
  • Also suitable for retrofitting

Mode of operation

  • The electric positioning unit moves the electromechanical block clamp unit along the T-slot.
  • The clamping force is generated by an electric drive and a toothed gearing.

Description

The electric positioning unit moves the block clamp unit by means of a spindle and spindle nut. A second electric motor generates a spindle stroke by means of a gear drive which rotates the angle-shaped clamping jaw on its pivot bearing. The force generated thereby is transferred onto the die clamping edge. Unclamping is achieved by reversing this sequence. This systems allows short clamping and unclamping time with medium clamping dimension tolerances.

All functions are monitored by limit switch signals. The clamping force is continuously monitored. The electric positioning units may be switched off individually by the machine control so that these clamp units remain in their park position.

  • Clamping of different die sizes
  • Short clamping and unclamping time
  • Mechanically self-locking
  • Displacement path up to 800 mm available
  • All important functions electrically monitored
  • Continuous clamping force monitoring
  • High automation level
  • Central operation
  • High mechanical loading force

  • Limit switches / cable
  • Plug connectors
  • Motors

Technical data

Positioning Unit EVS
Motor: Type
Supply voltage		 three-phase
400 V 50 HZ
Motor power [W] 60
displacement velocity [mm/s] 91
Limit switches: Type
Switch voltage
Designation		 • Inductive proximity switches
• PNP normally open; 10-30V DC
• Clamp unit in park position S7
• Clamp unit at the die edge S8
Plug connector Han® 25 D
Han® 6 E

 

Clamp Unit EBS
Clamping force [kN] 60 120 240
max. loading force [kN] 1) 100 200 450
Motor: Type
Supply voltage		 three-phase
400 V AC
Motor power [kW] 0,55 0,75 1,5
Limit switches: Type
Switch voltage
Designation		 • Inductive proximity switches
• PNP normally open; 10-30V DC
• Clamping jaw within the permissible S4
clamping range
• Clamping jaw released S5
• Continuous clamping force monitoring S6
Clamping dimension tolerance [mm] +/- 5
max. operating temperature[°C] 70
Weight [kg] 53 56 58

 

1) Mechanical damage may occur at higher load.

Fixing is achieved with four hexagon head screws M12x30, strength class 8.8. (not included).